Fire Safety Measures in Electric Vehicle Service Centers is one of the most important preparation topics for businesses seeking TSE K646 consultancy before starting the application process. Unlike conventional automotive workshops, fire safety measures in electric vehicle service centers must also address risks related to batteries, charging infrastructure and high-voltage systems.
Divide risks by area
Vehicle reception, charging, maintenance and repair, temporary battery storage, waste and storage areas all present different fire risks. These areas should be clearly shown on the facility layout, emergency exit routes should be clearly defined, and warning signs should be installed in high-risk zones.
Charging area safety
The area around the charging station should be planned with proper cable management, ventilation, an emergency shut-off point, easy access to fire-fighting equipment and clear markings to prevent unauthorized access. Potential fault scenarios that may occur during charging should also be included in the emergency response plan.
Equipment selection and maintenance records
The type, capacity and placement of fire-fighting equipment should be evaluated in consultation with an occupational health and safety specialist and in accordance with applicable regulations. Maintenance dates, refill or pressure checks, accessibility and personnel training should all be properly documented.
Personnel training and drills
For fire safety measures to be effective, personnel should understand fire classifications, evacuation procedures, safe approaches to high-voltage vehicles and the emergency communication chain. Regular drills and corrective action records also provide strong evidence of preparedness during inspections.
Fire Safety Measures in Electric Vehicle Service Centers – Checklist
- Show high-risk areas on the facility layout
- Create an emergency shut-off procedure for the charging area
- Place fire extinguishers in easily accessible locations
- Maintain inspection and maintenance records
- Plan fire safety training for personnel
- Document and archive drill results
Continue with internal links
Before proceeding further with your application preparations, you can review our FAQ page, our TSE K646 consultancy service and our TS 12047 consultancy page.
Prepare for the TSE K646 process quickly and thoroughly
Get professional support for service area compliance analysis, document preparation, equipment checks and preparation for the TSE inspection.
Frequently Asked Questions
Is a battery fire treated differently from a conventional fire?
Yes. In battery-related incidents, the response approach and the assessment of isolation and cooling requirements may differ. The plan should be developed with input from relevant local specialists.
How is the required number of fire extinguishers determined?
The number is determined according to the size of the facility, the risk classification, the type of equipment and the occupational health and safety assessment. A site-specific plan should be prepared rather than relying on a general list.
Are fire safety measures checked during a TSE inspection?
Yes. Fire-fighting equipment, the emergency response plan, safety signage, personnel awareness and record-keeping are important elements in evaluating the suitability of the service center.
